Section 344 (Body Control System)
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Schematic and Routing Diagrams
- Component Locator
- Diagnostic Information and Procedures
- Diagnostic Starting Point - Body Control System
- Scan Tool Data List
- Scan Tool Data Definitions
- Diagnostic Trouble Code (DTC) List
- DTC B1000: Internal Fault
- DTC B1001: Module Is Not Configured Properly
- DTC B1004: KAM In The Module Has Been Reset
- DTC B1007: EEPROM Error
- DTC B1009: EEPROM Check Sum Error
- DTC B1372: Ignition 1 Input To The BCM Is Not Active
- DTC B1382: BCM Does Not Detect The Accessory Input
- Power Mode Mismatch
- Control Module References
- Repair Instructions
- Description and Operation