LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2001 >> Metro >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> Fuel Systems >> Fuel System Pressure Release >> Prizm
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel System Pressure Release: Prizm

  1. Loosen fuel filler cap to relieve pressure in fuel tank. Remove circuit opening relay. Circuit opening relay is located under left side of instrument panel, above kick panel.
  2. Crank engine. Allow engine to start, then stall. After engine stalls, crank engine for an additional 3 seconds to relieve any remaining fuel pressure. Disconnect negative battery cable. Place shop towel around component to be serviced to reduce chance of personal injury.
  3. After repair of fuel-related component, connect negative battery cable. Install circuit opening relay and tighten fuel filler cap.
scientia non olet · About LEMON Manuals