Test G: Lock-Out Function Inoperative
NOTE:
To identify harness connectors and terminals, see WIRING DIAGRAMS
.
- Review description and operation of power window system, then go to next step. See DESCRIPTION & OPERATION .
- Turn ignition switch to RUN position. Check operation of lock-out function. If only lock-out function is inoperative, go to next step. If other power windows are inoperative, diagnose by symptom. See SYMPTOM INDEX table.
- Inspect master power window switch harness connector for poor connections or intermittent condition. See appropriate BODY CONTROL MODULES article. If concern still exists, go to next step.
- Replace master power window switch. After repair, go to next step.
- Operate system to verify repair. If concern does not exist, system is okay. If concern still exists, go to step 3 .