Test Description

The numbers below refer to the step numbers on the diagnostic table.

1. 2
   
   Listen for an audible click when the A/T shift lock solenoid operates. Command both the ON and OFF states. Repeat the commands as necessary.
2. 3
   
   Tests for voltage at the A/T shift lock solenoid.
3. 4
   
   Verifies that the body control module (BCM) is providing ground to the A/T shift lock solenoid.
4. 5
   
   Tests if ground is constantly being applied to the A/T shift lock solenoid.
5. 16
   
   The body control module must be programmed for the vehicle RPO configuration.