LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Prizm Base, Automatic, A245E/MS7 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock Systems >> Removal & Installation >> STOPLAMP Switch >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

STOPLAMP Switch: Installation

  1. Install the stoplamp switch (1) to the brake pedal bracket. Secure the stoplamp switch using one lock nut. DO NOT tighten. Adjust the stoplamp clearance. See STOPLAMP SWITCH  under ADJUSTMENTS.
  2. After adjustment, tighten the lock nut for the stoplamp switch to 89 INCH lbs. (10 N.m). Connect the stoplamp switch electrical connector.
  3. Install the left side air outlet duct to the instrument panel. Secure the outlet duct with the screw. Install the left side air outlet duct to the instrument panel. Secure the outlet duct with the plastic retainer. Install the knee bolster. See KNEE BOLSTER  . Connect the negative battery cable.
scientia non olet · About LEMON Manuals