LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Tracker 2D Utility, 4WD, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock Systems >> Removal & Installation >> Shift Lock Control Cable >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Shift Lock Control Cable: Removal

  1. Disable the SIR system. See AIR BAG DEACTIVATION PROCEDURES article in GENERAL INFORMATION. Remove the following from the floor:
    1. The 4 screws (1,6,3,4). See Fig 1 .
    2. The 2 plastic retaining clips (2,5).
    3. The console box.
  2. Remove the following components from the steering column:
    1. The screws.
    2. The steering column upper cover.
    3. The steering column lower cover.
  3. Remove the bracket retaining screw (2) from the ignition switch. See Fig 2 . Remove the interlock cable (1) from the ignition switch. Remove the interlock cable nut. Remove the interlock cable at the manual selector.
  4. Remove the interlock cable (1) out from under the instrument panel. Remove the interlock cable from under the carpet. Remove the interlock cable from the interlock cable bracket at the manual selector. Inspect the interlock cable for fraying or kinks. Replace the cable as necessary.
Fig 1: Removing/Installing Center Floor Console
G00074265Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing/Installing Interlock Cable
G00074266Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals