Rear Integration Module

WARNING: This page is about a different car, the 2001 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.

After replacement, reset owner's desired memory settings (seats, mirrors, radio, A/C), or perform the following procedure to recalibrate automatic level control:

Ensure scan tool has been updated with latest software version.
Connect scan tool to Data Link Connector (DLC). DLC is located below left side of instrument panel, near steering column. See Figure .
Turn ignition switch to RUN position.
Under chassis main menu, select Rear Integration Module (RIM).
Under RIM main menu, select RECALIBRATION.
Follow scan tool instructions to recalibrate automatic level control.