LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Venture Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Body Control Modules) >> Programming >> Tire Pressure Monitoring Sensor >> Programming Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming Sensor

WARNING: This page is about a different car, the 2001 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to RUN position.
    2. NOTE: If tire pressure monitoring programming mode cannot be entered, ensure if Dash Integration Module (DIM) is properly configured with correct Regular Production Option (RPO) codes.
  2. Press remote transmitter lock and unlock buttons simultaneously for several seconds. Horn will chirp to indicate tire pressure monitoring programming mode has been activated.
  3. Beginning with left front tire, install Tire Pressure Monitor Programming Tool (J-41760).
    4. NOTE: If horn does not chirp after 15 seconds, remove, then install Tire Pressure Monitor Programming Tool (J-41760).
  4. Horn will chirp, indicating left front tire pressure monitoring sensor is programmed.
  5. When horn chirps, proceed to program remaining tire pressure monitoring sensors as follows: right front tire, right rear tire and left rear tire.
  6. After left rear sensor is programmed, horn will chirp twice to indicate programming is complete.
scientia non olet · About LEMON Manuals