LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> Impala LS >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Traction Control Switch Replacement (Monte Carlo) >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Traction Control Switch At Floor Console Trim Plate (Monte Carlo)
    GM578676Courtesy of GENERAL MOTORS CORP.
  1. Install the traction control switch to the floor console trim plate.
  2. Connect the electrical connector to the traction control switch.
  3. Fig 2: Identifying Front Floor Console Trim Plate Screw (Monte Carlo)
    GM578742Courtesy of GENERAL MOTORS CORP.
  4. Carefully install the floor console trim plate. Make sure all of the retainers are fully engaged.
  5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. Install the floor console trim plate screw (1).

    Tighten:  Tighten the floor console trim plate screw to 2 N.m (18 lb in).

  7. Position the transaxle shift control lever to Park.
  8. Install the center console mat.
  9. Release the park brake.