LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> Monte Carlo LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls Self-Diagnostics - 3.4L >> Programming >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Controls Self-Diagnostics - 3.4L: Programming: Notes

NOTE: DO NOT program an existing PCM with the identical software/calibration package. This procedure is not a short cut to correct a driveability condition. This is an ineffective repair. A PCM should only be programmed when a service procedure instructs you to replace the PCM or when General Motors Corporation releases an updated software/calibration package.

After replacing Powertrain Control Module (PCM) or if program needs to be updated, refer to latest Techline® information on PCM reprogramming. PCM can only be programmed using Tech 2® and Techline® terminal, or by using a personal computer equipped with the current service programming system software installed.

scientia non olet · About LEMON Manuals