LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control System >> Repair Instructions >> Body Control Module (BCM) Programming/RPO Configuration >> Body Control Module (BCM) Setup
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Body Control Module (BCM) Setup

Perform the following steps:

  1. Ensure that the battery is fully charged.
  2. Connect a scan tool to the data link connector (DLC).
  3. Turn ON the ignition, with the engine and all accessories OFF.
  4. Program the BCM. Refer to Service Programming System (SPS) (Remote Procedure) or Service Programming System (SPS) (Pass-Thru Procedure) or Service Programming System (SPS) (Off Board Remote Procedure) or Service Programming System (SPS) (Off Board Pass-Thru Procedure) in Programming.
  5. Perform the Programming Theft Deterrent System Components in Theft Deterrent.
  6. Clear all diagnostic trouble codes (DTCs) with the scan tool.

After the procedure is completed, the personalization settings of the BCM are set to a default setting. Inform the customer that the personalization must be set again.

scientia non olet · About LEMON Manuals