LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC Systems - Manual >> Repair Instructions >> HVAC Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying I/P Accessory Trim Plate
    GM1241547Courtesy of GENERAL MOTORS CORP.
  1. Connect the HVAC control module electrical connector.
  2. Install the HVAC control module.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the HVAC control module retaining screws.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

  4. Install the right knee bolster. Refer to Knee Bolster Replacement - Right in Instrument Panel, Gages, and Console.
    5. IMPORTANT: Do not adjust any controls on the HVAC control module while the HVAC control module is self-calibrating. If interrupted, improper HVAC performance will result.
  5. Install the I/P trim panel. Refer to Instrument Panel (I/P) Trim Panel Replacement - Right in Instrument Panel, Gages, and Console.
  6. Install the storage compartment. Refer to Storage Compartment Replacement - Instrument Panel (I/P) in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals