Test C: Charge Indicator Inoperative
- If diagnostic system check was not performed, perform ENGINE ELECTRICAL DIAGNOSTIC SYSTEM CHECK . If diagnostic system check was performed, go to next step.
- Turn ignition switch to RUN position. Observe charge indicator on Instrument Panel Cluster (IPC). If the charge indicator illuminates, problem is intermittent. Check wiring and connections. If change indicator does not illuminate, go to next step.
- Replace IPC. See INSTRUMENT PANEL CLUSTER (IPC) REPLACEMENT in INSTRUMENT PANEL, GAGES, AND CONSOLE. After repair, go to next step.
- Operate system to verify repair. If system is not operating correctly, repeat test beginning at step 2 .