LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 5.3L - Introduction >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove intake manifold. Refer to Intake Manifold Replacement .
  2. Disconnect the electrical connector from the camshaft position (CMP) sensor.
    3. IMPORTANT: Clean the area around the CMP sensor before removal in order to prevent debris from entering the engine.
    Fig 1: View Of Camshaft Position (CMP) Sensor & Bolt
    GM260128Courtesy of GENERAL MOTORS CORP.
  3. Remove the CMP sensor retaining bolt.
  4. Remove the CMP sensor.
scientia non olet · About LEMON Manuals