LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 5.3L - Introduction >> Repair Instructions >> Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

IMPORTANT: Clean the tube connections and surrounding areas before disconnecting in order to avoid possible evaporative emission (EVAP) system contamination.
    Fig 1: View Of EVAP Purge Solenoid Vent Tube
    GM898353Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the EVAP tube from the EVAP canister purge solenoid.
    • Push the large size white retainer portion in.
    • Push down, while pulling up slightly in order to disengage the tube.
  2. Disconnect the EVAP tube from the chassis EVAP pipe.
    • Push the large size white retainer portion in.
    • Push down, while pulling up slightly in order the disengage the tube.
  3. Remove the EVAP tube.
  4. Cap the EVAP canister purge solenoid and the EVAP chassis pipe in order to prevent possible EVAP system contamination.
scientia non olet · About LEMON Manuals