LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 5.3L - Introduction >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

IMPORTANT: Clean all the fuel pipe connections and surrounding areas before disconnecting the pipes in order to avoid possible contamination of the fuel system.
    Fig 1: Locating EVAP Components
    GM887437Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
  2. Disconnect the fuel return line from the sender assembly. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  3. Disconnect the fuel feed line from the fuel filter. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  4. Cap the fuel sender assembly pipes.
  5. Disengage the fuel lines from the clip (7) at the front of the fuel tank.
  6. Remove the fuel lines.
scientia non olet · About LEMON Manuals