LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 5.3L - Introduction >> Repair Instructions >> Knock Sensor (KS) Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying Knock Sensors
    GM54612Courtesy of GENERAL MOTORS CORP.
  1. Install the KS.

    Tighten:  Torque the sensor to 20 N.m (15 lb ft).

    2. Fig 2: Knock Sensor Wiring Harness Assembly
    GM54608Courtesy of GENERAL MOTORS CORP.
  2. Install the KS wiring harness assembly.
  3. Install the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical.
scientia non olet · About LEMON Manuals