HVAC System Torque Specifications
HVAC SYSTEM TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| A/C Compressor | ||
| Bracket Bolt | 37 (50) | |
| Mounting Bolt | 37 (50) | |
| Compressor Hose | ||
| Assembly-To-Compressor Retaining Nut | 15 (20) | |
| To-Condenser Fitting Bolt | 12 (16) | |
| Liquid Line | ||
| To-Compressor Hose Nut | 12 (16) | |
| To-Condenser Fitting Bolt | 12 (16) | |
| TXV Block Fitting Nut | 15 (20) | |
| In. Lbs. (N.m ) | ||
| A/C Refrigerant Pressure Sensor | 44 (5) | |
| Actuator Retaining Bolts | 17 (1.9) | |
| Blower Motor | ||
| Bracket Bolt | 89 (10) | |
| Nut | 89 (10) | |
| Resistor Retaining Screws | 17 (1.9) | |
| Retaining Screws | 14 (1.6) | |
| Heater Core | ||
| Clamp Screw | 17 (1.9) | |
| Pipe Clamp Screw | 14 (1.6) | |
| HVAC | ||
| Control Module Retaining Bolts | 14 (1.6) | |
| Module Case Half Screws | 17 (1.9) | |
| Module Retaining Bolts/Nut | 70 (8) | |
| Mode Actuator | 17 (1.9) | |
| Recirculation Actuator | 17 (1.9) | |
| TXV-To-Evaporator Core Mounting Bolts | 62 (7) | |
| Valve Core | 97 (11) | |