LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 5.3L - Introduction >> Repair Instructions >> Evaporative Emission (EVAP) Canister Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    IMPORTANT: Considerable force may be necessary to install the EVAP canister into the two tab side.
  1. Slide the EVAP canister into the single tab side and press the canister into the two tab side.

    Ensure the tabs have completely engaged.

    2. Fig 1: Identifying EVAP Vapor Pipe & Vent Pipe
    GM887623Courtesy of GENERAL MOTORS CORP.
  2. Connect the EVAP purge pipe to the EVAP canister. The purge pipe is the small pipe next to the vapor pipe (2).
  3. Connect the EVAP vent pipe (1) to the EVAP canister.
  4. Connect the EVAP vapor pipe (2) to the EVAP canister.
  5. Install the fuel tank. Refer to Fuel Tank Replacement .
  6. Lower the vehicle.
scientia non olet · About LEMON Manuals