Removal Procedure

Fig 1: View Of Filler Door And Tethered Fuel Filler Cap

Courtesy of GENERAL MOTORS CORP.

Clean all the fuel pipe and hose connections and the surrounding areas before disconnection in order to avoid possible contamination of the fuel system.
Remove the fuel filler cap.
Drain the fuel below the level of the fuel filler hose. Refer to Fuel Tank Draining Procedure .

Fig 2: Identifying Fuel Filler Components

Courtesy of GENERAL MOTORS CORP.

Remove the fuel fill pipe housing to fuel fill pipe bolts.
Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
Remove spare tire.

Fig 3: Identifying Fuel Fill Pipe Ground Strap

Courtesy of GENERAL MOTORS CORP.

Fig 4: View of Fuel Fill Hose

Courtesy of GENERAL MOTORS CORP.

Disconnect the rear axle vent hose from the retainer on the fuel fill pipe, if applicable.
Loosen the fuel vent hose to fuel tank clamp (1).
Loosen the fuel fill hose to fuel tank clamp (11).
Disconnect the fuel fill pipe bracket bolt (3).
Disconnect the fuel fill and vent hoses from the fuel tank.
Remove the fuel fill and vent pipe and hose assembly.
Cap the open end of the fuel tank.