LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 5.3L - Introduction >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Locating EVAP Components
    GM887437Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel lines.
  2. Engage the fuel lines to the clip (7) at the front of the fuel tank.
  3. Remove the caps from the fuel sender assembly pipes.
  4. Connect the fuel feed line to the fuel filter. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  5. Connect the fuel return line to the sender assembly. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  6. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About LEMON Manuals