LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> Tracker 2D Utility, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Diagnostic Procedures >> Ignition Systems >> Electronic Ignition System >> Test Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Description

The numbers below refer to the step numbers in the diagnostic procedure.

  1. 2

    Cranking engine for 10 seconds allows CMP sensor diagnostic to run. If there is a fault in CMP sensor circuit, ignition system can malfunction. Repair cause of a DTC P0340 first.

  2. 5

    This step checks for a condition that can cause a loss of spark, even though results in step  3 indicated that there was good spark.

  3. 13

    This step checks whether engine will start and run. A repair that has been performed leading to this step may only have been a contributing cause of a no-start condition. Returning to NO-START - ENGINE CRANKS OKAY (2.0L)  or NO-START - ENGINE CRANKS OKAY (2.5L)  under NO-START DIAGNOSIS, will locate additional causes of a no-start condition.

scientia non olet · About LEMON Manuals