LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Astro Van Cargo, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 4.3L - Introduction >> Repair Instructions >> Engine Coolant Temperature (ECT) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

NOTE: Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.
  1. Turn OFF the ignition.
  2. Remove the engine cover. Refer to Engine Cover Replacement in Interior Trim.
  3. Drain the coolant below the level of the ECT sensor. Refer to Draining and Filling Cooling System in Engine Cooling.
  4. Disconnect the electrical connector.
    Fig 1: Identifying Engine Coolant Temperature (ECT) Sensor Electrical Connector
    GM246797Courtesy of GENERAL MOTORS CORP.
  5. Carefully remove the ECT sensor.
    Fig 2: View Of ECT Sensor
    GM246800Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals