Scan Tool Data Definitions
- 8-Digit GM Part Number
-
The scan tool displays an 8-digit number which indicates the GM part number of the module.
- Calibration ID
-
The scan tool displays a 4-digit number which indicates the calibration ID number of the module.
- Invalid Transmitter
-
The scan tool displays Greater than 10 or Less than 10 which indicates how many times an invalid transmitter has been used in the vicinity of the vehicle.
- No. of Fobs Programmed
-
The scan tool displays 1 Fob-4 Fobs to indicate the number of keyless entry transmitters that are programmed for the system.
- Key Pressed On Fob
-
The scan tool displays Dr. Door Unlock, Door Lock, All Door Unlock, Trunk, or Fuel Door/Alarm which indicates the last pressed keyless entry transmitter button.
- Last Fob Used
-
The scan tool displays Fob #1-Fob #4 which indicates the number of the last keyless entry transmitter used to operate the keyless entry system.
- PROM ID
-
The scan tool displays a 4-digit number that identifies the PROM.