Scan Tool Output Controls
Electronic Brake Control Module (EBCM) Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selections | Description |
|---|---|---|
| ABS Relay | - | Commands the ABS relay ON and OFF |
| Automated Bleed | - | Used in order to bleed the ABS hydraulics-Refer to ABS Automated Bleed Procedure . |
| Automated Test | - | Cycles each solenoid valve and the pump motor in order to verify component operation. This test is identical to the Initialization Sequence. If a malfunction is detected, the EBCM will set the appropriate DTCs. The DTCs will be displayed upon completion of the test. |
| LF Inlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF |
| LF Outlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF |
| LR Inlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF |
| LR Outlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF |
| RF Inlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF |
| RF Outlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF |
| RR Inlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF |
| RR Outlet Solenoid | Solenoid Test | Commands the solenoid ON and OFF |