LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Seat Belt Retractor Replacement - Front >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View of Seat Belt Retractor Assembly
    GM608315Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Remove any twists in the seat belt webbing before final assembly.
  1. Install the seat belt retractor assembly.
    2. Fig 2: View of Seat Belt Retractor
    GM608217Courtesy of GENERAL MOTORS CORP.
  2. Insert the top of the retractor into the mounting slots and pull downward.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the seat belt retractor bolt.

    Tighten:  Tighten the bolt to 41 N.m (30 lb ft).

    4. Fig 3: View of Seat Belt Guide Clip
    GM608310Courtesy of GENERAL MOTORS CORP.
  4. Install the seat belt guide clip. Ensure that the unit locks into position.
    5. Fig 4: View of Shoulder Belt Guide Cover
    GM608299Courtesy of GENERAL MOTORS CORP.
  5. Install the shoulder belt guide.
  6. Install the shoulder belt guide bolt.

    Tighten:  Tighten the bolt to 41 N.m (30 lb ft).

    7. Fig 5: Identifying Front Seat Belt Anchor Bolt
    GM608211Courtesy of GENERAL MOTORS CORP.
  7. Install the seat belt anchor bolt.

    Tighten:  Tighten the bolt to 41 N.m (30 lb ft).

  8. Install the shoulder belt guide cover.
  9. Inspect the seat belt assembly for proper operation. Refer to Operational and Functional Checks .
  10. Install the trim panel to the lower center pillar. Refer to Trim Panel Replacement - Lower Center Pillar in Interior Trim.
scientia non olet · About LEMON Manuals