LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala Base, 3.4 E >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.4L (Introduction) >> Repair Instructions >> Accelerator Controls Cable Bracket Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
  2. Remove the cruise control cable from the throttle body lever.
  3. Remove the cruise control cable from the accelerator cable bracket.
  4. Fig 1: Removing Cruise Control Cable
    GM319387Courtesy of GENERAL MOTORS CORP.
  5. Remove the accelerator cable from the throttle body lever.
  6. Remove the accelerator cable from the accelerator cable bracket.
  7. Fig 2: Removing Accelerator Cable
    GM12735Courtesy of GENERAL MOTORS CORP.
  8. Remove the nut and the bolts from the accelerator cable bracket.
  9. Remove the accelerator cable bracket.
  10. Fig 3: Removing Accelerator Cable Bracket
    GM12689Courtesy of GENERAL MOTORS CORP.