LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala Base, 3.4 E >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.4L (Introduction) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install a new seal to the fuel tank pressure sensor.
  2. Install the fuel tank pressure sensor (7) to the fuel sender assembly.
  3. Install the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
    4. Fig 1: Fuel Pump & Sender Assembly Component View
    GM50636Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals