Installation Procedure
- Install the air cleaner housing by pushing the housing into the 2 rubber grommets (2) in the engine compartment.
- Install the PCM (4) and the harness into the air cleaner housing (1).
- Install the air cleaner housing cover assembly (1).
- Install the 2 screws (2) into the 2 air cleaner housing sections.
Tighten: Tighten the screws to 4 N.m (35 lb in).
- Install the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
- Install the left inner fender brace. Refer to Brace Replacement - Front Fender Upper Diagonal in Body Front End.
NOTE:
Refer to Fastener Notice in Cautions and Notices.