LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.8L (Introduction) >> Repair Instructions >> Air Cleaner Intake Duct Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Disconnect the intake air temperature (IAT) sensor electrical connector (3).
  2. Remove the IAT sensor with a twisting and pulling motion.
  3. Loosen the air cleaner intake duct clamp.
  4. Remove the air cleaner intake duct from the air cleaner cover.
  5. Remove the air cleaner intake duct from the throttle body.
  6. Fig 1: Disconnecting IAT Sensor Electrical Connector
    GM760425Courtesy of GENERAL MOTORS CORP.