LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.8L (Introduction) >> Repair Instructions >> Throttle Position (TP) Sensor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the fuel injector sight shield. Refer toFuel Injector Sight Shield Replacement in Engine Mechanical-3.8L.
  2. Disconnect the throttle position (TP) sensor electrical connector.
  3. Fig 1: Disconnecting TP Sensor Electrical Connector
    GM178680Courtesy of GENERAL MOTORS CORP.
  4. Remove the 2 TP sensor screws.
  5. Fig 2: Removing TP Sensor Screws
    GM178693Courtesy of GENERAL MOTORS CORP.
  6. Remove the TP sensor.
  7. Fig 3: Removing TP Sensor
    GM178694Courtesy of GENERAL MOTORS CORP.