Fastener Tightening Specifications

Application	Specification
Application	Metric	English
Accelerator Cable Bracket Bolt	10 N.m	89 lb in
Accelerator Control Pedal Bolt and Stud	5 N.m	44 lb in
Air Cleaner Housing Cover Screws	4 N.m	35 lb in
Air Cleaner Intake Duct Clamp	2 N.m	18 lb in
Boost Control Solenoid Nut	8 N.m	71 lb in
Bypass Valve Actuator Mounting Bolt	25 N.m	18 lb ft
Camshaft Position (CMP) Sensor Bolt	10 N.m	89 lb in
Crankshaft Position (CKP) Sensor Stud	30 N.m	22 lb ft
Engine Coolant Temperature (ECT) Sensor	20 N.m	15 lb ft
Engine Mount Strut Bolt/Nut	48 N.m	35 lb ft
EVAP Solenoid Vent Valve Bracket Bolt	10 N.m	89 lb in
Exhaust Gas Recirculation (EGR) Valve Adapter Bolt and Stud	50 N.m	37 lb ft
Exhaust Gas Recirculation (EGR) Valve Intake Pipe to Exhaust Manifold Bolt	30 N.m	22 lb ft
Exhaust Gas Recirculation (EGR) Valve Outlet Pipe to Adapter Nut	30 N.m	22 lb ft
Exhaust Gas Recirculation (EGR) Valve Outlet Pipe to Intake Manifold Bolt	30 N.m	22 lb ft
Exhaust Gas Recirculation (EGR) Valve Nut	30 N.m	22 lb ft
Fuel Filler Pipe Screw to the Fuel Filler Pipe	2.5 N.m	22 lb in
Fuel Rail Hold-Down Bolt/Nut	10 N.m	89 lb in
Fuel Rail Hold-Down Stud	25 N.m	18 lb ft
Fuel Sender Access Panel Nut	10 N.m	89 lb in
Fuel Tank Filler Pipe Hose Clamp	2.5 N.m	22 lb in
Fuel Tank Filler Pipe Screw	13 N.m	115 lb in
Fuel Tank Retaining Strap Bolt	48 N.m	35 lb ft
Heated Oxygen Sensor (HO2S)	41 N.m	30 lb ft
Idle Air Control (IAC) Valve Screw	3 N.m	27 lb in
Ignition Coil to Ignition Control Module (ICM) Screw	4.5 N.m	40 lb in
Ignition Control Module (ICM) Nut	10 N.m	89 lb in
Ignition Control Module 14 Way Connector to Module Screw	2.1 N.m	19 lb in
In-Line Fuel Filter Mounting Bracket Bolt	20 N.m	15 lb ft
In-Line Fuel Filter Outlet Nut	30 N.m	22 lb ft
Knock Sensor (KS)	19 N.m	14 lb ft
Knock Sensor (KS) Heat Shield Bolt	60 N.m	44 lb ft
Manifold Absolute Pressure (MAP) Sensor Screw	5 N.m	44 lb in
Mass Air Flow (MAF) Sensor Screw	3 N.m	27 lb in
Powertrain Control Module (PCM) Electrical Connector Bolt	8 N.m	71 lb in
Spark Plug
To a New Cylinder Head	27 N.m	20 lb ft
To an Existing Cylinder Head	15 N.m	11 lb ft
Throttle Body Nut	10 N.m	89 lb in
Throttle Body Support Bracket Bolt	16 N.m	12 lb ft
Throttle Position (TP) Sensor Screw	2 N.m	18 lb in