LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 1147 (Shift Lock Control System) >> Repair Instructions >> Automatic Transmission Shift Lock Control Actuator Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Disconnecting Shift Lock Control Solenoid Connector From Solenoid
    GM1285267Courtesy of GENERAL MOTORS COMPANY
  1. Remove the automatic transaxle control assembly. Refer to Transmission Control Replacement , for the MH8 transmission or Transmission Control Replacement for the MH2 transmission.
  2. Disconnect the Shift Lock Control Solenoid connector from the solenoid.
    3. Fig 2: Prying Solenoid Off Of Ball-Sockets On Solenoid Plunger And Solenoid Body
    GM1285268Courtesy of GENERAL MOTORS COMPANY
  3. Using a flat-blade screwdriver or similar tool pry the solenoid off of the ball-sockets on the solenoid plunger and solenoid body.
    4. Fig 3: View Of Shift Lock Control Solenoid
    GM1285269Courtesy of GENERAL MOTORS COMPANY
  4. Remove the shift lock control solenoid.
scientia non olet · About LEMON Manuals