Circuit/System Testing
WARNING: This page is about a different car, the 2006 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the R1 RAP relay and connect a test lamp between the rap relay coil supply voltage circuit and ground.
- Ignition ON. The test lamp should turn ON.
- If the test lamp remains OFF, test for a short to ground the relay control circuit. If the circuit tests normal, replace the BCM.
- If the test lamp turns ON, test or replace the RAP relay.
- If the circuit tests normal and the DTC is current, test or replace the R1 RAP relay or BCM.