Installation Procedure

WARNING: This page is about a different car, the 2007 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Garage Door Opener, GDO Fasteners, Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the garage door opener (GDO) electrical connector (4).
Place the GDO (5) into the overhead console. Ensure the GDO buttons are placed correctly in their designated openings.

NOTE: Refer to Fastener Notice .

Install the fasteners (3).
Tighten: Tighten the fasteners (3) to 2 N.m (18 lb in).
Install the overhead console. Refer to Roof Console Replacement .
Program the GDO. Refer to Control Module References for programming and setup information.