Installation Procedure

WARNING: This page is about a different car, the 2007 Pontiac Montana SV6, 2007 Chevrolet Uplander, and 2007 Buick Terraza. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Door Lock Receiver

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the door lock receiver.
Engage the retaining tabs in order to install the door lock receiver to the I/P upper trim.
Install the I/P upper trim.
Program transmitter to the new receiver. Refer to Control Module References for programming and setup information.