Side Object Sensor Bracket Replacement
WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the side object sensor module. Refer to Side Object Sensor Replacement . |
|
| 1 | Side Object Sensor Bracket Rivet (Qty: 4)
CAUTION:
When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury. Procedure: Locate and drill out all factory rivets. |
| 2 | Side Object Sensor Bracket Tip: Disconnect the electrical connectors. |