Side Object Sensor Replacement
WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the bumper fascia. Refer to Rear Bumper Fascia Replacement . |
|
| 1 | Side Object Sensor Module Bolt
NOTE:
Refer to Fastener Notice
. Tip: Disconnect the electrical connectors. Tighten: 9 N.m 80 lb in |
| 2 | Side Object Sensor Module |