LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala LS >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Child Restraint Tether Anchor Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    IMPORTANT: The child seat tether brackets have an anti-rotation tab. For Impala only, you must rotate this tab 90 degrees (Impala only) in order to remove or install the tether to the rear shelf.
  1. Remove the rear shelf trim panel. Refer to Trim Panel Replacement - Rear Window Shelf (Impala) or Trim Panel Replacement - Rear Window Shelf (Monte Carlo) in Interior Trim.
  2. Remove the screws from the child seat tether brackets.
  3. For Impala only, rotate the child seat tether brackets 90 degrees in order to remove the child seat tether brackets from the slot.
  4. Remove the child seat tether brackets from the rear shelf.
    5. Fig 1: Removing Child Seat Tether Brackets
    GM471322Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals