LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.8L (Introduction) >> Repair Instructions >> Accelerator Controls Cable Bracket Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical - 3.8L.
  2. Remove the cruise control cable from the throttle body lever.
  3. Remove the cruise control cable (1) from the bracket (2).
    4. Fig 1: Removing Cruise Control Cable
    GM179339Courtesy of GENERAL MOTORS CORP.
  4. Remove accelerator cable from the throttle body lever.
  5. Remove the accelerator cable (2) from the bracket (1).
    6. Fig 2: Removing Accelerator Cable
    GM179346Courtesy of GENERAL MOTORS CORP.
  6. Remove the accelerator controls cable bracket bolts.
  7. Remove the accelerator controls cable bracket from the throttle body.
    8. Fig 3: Removing Accelerator Controls Cable Bracket
    GM12246Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals