LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.8L (Introduction) >> Repair Instructions >> Air Cleaner Intake Duct Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the air cleaner intake duct to the throttle body.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the air cleaner intake duct to the air cleaner cover.

    Tighten:  Tighten the air cleaner duct clamp to 2 N.m (18 lb in).

  4. Install the IAT sensor.
  5. Connect the IAT sensor electrical connector (3).
  6. Fig 1: Connecting IAT Sensor Electrical Connector
    GM760425Courtesy of GENERAL MOTORS CORP.