LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.8L (Introduction) >> Repair Instructions >> Exhaust Gas Recirculation (EGR) Valve Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install a new EGR valve gasket (2).
  2. Install the EGR valve (1).
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the EGR valve nuts (4).

    Tighten:  Tighten the nuts to 30 N.m (22 lb ft).

  4. Connect the EGR valve electrical connector.
    5. Fig 1: EGR Valve & Components
    GM12312Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals