BARTEC TPMS Reset Procedure

Using Light Switch

1. Inflate tires to correct pressure.
2. Turn Ignition ON.
3. Turn the light switch from OFF to Parking Lamps 3 times within 5 seconds.

Using Radio

1. Inflate tires to correct pressure.
2. Turn ignition to ON position (engine off).
3. Turn radio off.
4. Hold DISP button until SETTINGS is displayed.
5. Use SEEK buttons to scroll down until TIRE MON is displayed.
6. Press the PREV or NEXT buttons until RESET is displayed.
7. Press the DISP button, a chime will sound and DONE is displayed.
8. Scroll until EXIT is displayed, press DISP button, chime sounds to signal exit from learn mode.