LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Monte Carlo LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.4L (Introduction) >> Repair Instructions >> Accelerator Controls Cable Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the left instrument panel sound insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages, and Console.
  2. Remove the accelerator cable (5) from the accelerator pedal (1).
  3. Install a piece of mechanics wire to the accelerator cable to aid in the installation of the new cable.
    4. Fig 1: Accelerator Pedal & Components
    GM12287Courtesy of GENERAL MOTORS CORP.
  4. Squeeze the accelerator cable cover tangs and push the accelerator cable through the cowl.
    5. Fig 2: Pushing Accelerator Cable Through Cowl
    GM12262Courtesy of GENERAL MOTORS CORP.
  5. Remove the accelerator cable shield, if equipped.
  6. Remove the accelerator cable from the retaining clip.
  7. Remove the cruise control cable from the throttle body lever.
  8. Remove the cruise control cable from the accelerator cable bracket.
  9. Remove the accelerator cable from the throttle body lever.
  10. Remove the accelerator cable from the accelerator cable bracket.
    11. Fig 3: Removing Accelerator Cable
    GM12735Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Note the routing of the accelerator controls cable for removal.
  11. Remove the mechanics wire from the cable and remove the cable.
    12. Fig 4: Identifying Accelerator Cables
    GM12734Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals