Removal Procedure
- Remove the left inner fender brace. Refer to Brace Replacement - Front Fender Upper Diagonal
in Body Front End.
- Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
- Remove the 2 screws (2) from the air cleaner housing sections.
- Remove the air cleaner housing cover assembly (1).
- Without disconnecting the powertrain control module (PCM) electrical connectors, remove the PCM (4) and the wiring harness from the air cleaner housing (3).
Courtesy of GENERAL MOTORS CORP.
- Remove the air cleaner housing (1) by pulling the housing from the 2 rubber grommets (2) in the engine compartment.
- Inspect the air cleaner housing assembly for damage, replace if necessary.
Courtesy of GENERAL MOTORS CORP.