Installation Procedure
- Install the air cleaner element (6) to the air cleaner assembly (1).
- Install the air cleaner cover (5) with the air cleaner intake duct.
- Install the 2 air cleaner cover clips.
- Install the air cleaner intake duct to the throttle body.
- Tighten the air cleaner intake duct clamp (2).
Tighten: Tighten the clamp to 2 N.m (18 lb in).
- Connect the MAF sensor electrical connector (5).
- Install the PCV tube (4) to the air cleaner intake duct.
- Connect the IAT sensor electrical connector (3).
NOTE:
Refer to Fastener Notice in Cautions and Notices.