Removal Procedure
- Disconnect the intake air temperature (IAT) sensor electrical connector (3).
- Remove the positive crankcase ventilation (PCV) tube (4) from the air cleaner intake duct.
- Disconnect the mass air flow (MAF) sensor electrical connector (5).
- Loosen the air cleaner intake duct hose clamp (2).
- Remove the air cleaner intake duct from the throttle body.
Courtesy of GENERAL MOTORS CORP.
- Unclip the 2 air cleaner cover clips.
- Remove the air cleaner cover (5) with the air cleaner intake duct.
- Remove the air cleaner element (6) from the air cleaner assembly (1).
Courtesy of GENERAL MOTORS CORP.