LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Monte Carlo LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.4L (Introduction) >> Repair Instructions >> Filler Tube Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the fuel filler pipe to the fuel tank hose.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the fuel filler pipe screw to the under body.

    Tighten:  Tighten the screw to 10 N.m (89 lb in).

  4. Fig 1: Installing Fuel Filler Pipe
    GM699550Courtesy of GENERAL MOTORS CORP.
  5. Inspect and ensure the fuel tank hose (4) is fully seated between the beads (5,3) on the fuel filler pipe (2).

    Tighten:  Tighten the clamp to 2.5N.m (22 lb in).

  6. Fig 2: Identifying Fuel Tank Components
    GM186674Courtesy of GENERAL MOTORS CORP.
  7. Lower the vehicle.
  8. Install the fuel filler pipe screws to the fuel filler pocket.

    Tighten:  Tighten the screws to 2.5 N.m (22 lb in).

  9. Fig 3: Installing Fuel Filler Pipe Screws
    GM186665Courtesy of GENERAL MOTORS CORP.
  10. Add fuel and install the fuel fill cap.
  11. Inspect for fuel leaks.