Installation Procedure

Fig 1: Installing TP Sensor O-Ring

Courtesy of GENERAL MOTORS CORP.

Fig 2: Installing TP Sensor

Courtesy of GENERAL MOTORS CORP.

Apply thread-locking compound LOCTITE® 262, GM P/N 12345493 (Canadian P/N 10953488) or equivalent to the TP sensor screws.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the TP sensor screws.
Tighten: Tighten the screws to 2.0 N.m (18 lb in).

Fig 3: Installing TP Sensor Screws

Courtesy of GENERAL MOTORS CORP.

Fig 4: View Of TP Sensor & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the fuel lines. Refer to Quick Connect Fitting(s) Service (Metal Collar) .