Installation Procedure

Fig 1: View Of Rear Seat Belt Anchor Floor Bolts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the floor seat belt anchor bolts.
Tighten: Tighten the floor seat belt anchor bolt to 38 N.m (28 lb ft) .

Fig 2: View Of Rear Seat Belt Retractors And Bolts

Courtesy of GENERAL MOTORS CORP.

Install the rear seat belt retractor bolts (LH, Center, RH) on the back panel.
Tighten: Tighten the rear seat belt retractor bolts to 38 N.m (28 lb ft) .

Fig 3: View Of Rear Seat Cushion

Courtesy of GENERAL MOTORS CORP.

Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
Install the back shelf panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.